Oogveilige hoge CRI-zonlicht | Volledig spectrum lage blauwe 2850K 8W CRI97 24V LED-spotmodulee

Functie

Regelmatige blootstelling aan natuurlijk zonlicht is een belangrijk onderdeel van onze gezondheid. Vergeleken met binnenverlichting is natuurlijk zonlicht meer dan 100 keer feller en het gebrek daaraan kan een gezonde slaapcyclus verstoren. Felle lichttherapie is een vervanging voor zonlicht dat helpt bij het bestrijden van winterblues, rusteloze slaap, weinig energie en gebrek aan concentratie.

Onze ogen zijn ontworpen om zich aan te passen aan de lichtomstandigheden buiten. Wanneer ze worden blootgesteld aan buitenlicht, sturen fotoreceptoren in het netvlies genotssignalen naar onze hersenen. Gebruik regelmatig TILLUME full spectrum gloeilampen, het is bewezen dat ze helpen om de slaap te verbeteren, uw humeur te verbeteren, energie te verhogen en de focus te verbeteren, waardoor u zich verfrist voelt.

De lichtintensiteit gemeten in lux moet 10.000 zijn om een heldere zonnige dag te simuleren. TILLUME biedt veilige, gezonde en effectieve LED full spectrum lampen. Ze zijn UV-vrij, zonder schittering, flikkering of hot spots voor een aangename lichttherapie-ervaring binnenshuis.

Technische gegevens

Bedrijfsspanning: 24V DC
Max. stroomverbruik: 0,34 A
Maximaal stroomverbruik: 8 W
Lichtstroom: ca. 800 lm
Kleurtemperatuur: 2850K
Kleurweergave-index CRI: >97 Ra
Stralingshoek: 60 graden
Chiptype: COB
Levensduur: 50.000 uur
Dimbaar: ja, tot 0,1% met de juiste PWM-dimmers
Risicogroep: RG0 (vrijstellingsgroep) Stralingssterkte ≤ 100 W·m-2·sr-1, direct kijken naar de lichtbron op een afstand van 2 meter gedurende een lange tijd (t >2,8 uur) zal geen blauwlichtgevaar opleveren (volgens EN 62471)
Bedrijfstemperatuur: -25 graden Celsius tot +60 graden Celsius
Bewaartemperatuur: -40 graden Celsius tot +80 graden Celsius
Afmetingen: 50 mm met een diameter van 49 mm
Aansluitkabel: 150 mm, open draadeinden

Spectrale vermogensverdelingsgrafiek

Bediend met KNX-systeem

Controller door MDT TECHNOLOGIES

Beschikbaar voor het onderstaande artikel
AKD-0424R.02
AKD-0424R2.02
AKD-0424V.02
AKD-0324V.02
AKD-0224V.02

Werkt met DALI-systeem

Controller door LUNATONE

Beschikbaar voor het onderstaande artikel
DALI LED-voeding (DT6):
89453849 - 24V
DALI 1-kanaals LED-dimmer (CV, DT6):
89453826
86459556
86459572
89453829
89453829-HS

Why TILLUME Static White LED Spot Have Excellent Light Output

Almost without exception, our users marvel at our 24V LED Static White Spot. We are also proud of it.

 

 

After careful selection, we have specially made CCT for LED Spots

The color temperature of traditional incandescent lamps is generally around 2850K, which is more in line with the habit of our naked eyes. Generally, the color temperature of LEDs is 2700K or 3000K. They are either too yellow or slightly white for us. It is more difficult to give us the perfect feeling. And according to research 2850K incandescent lamps are easier to create a warm environment.

In addition, the proportion of the red part in the 2850K color temperature is more suitable for our naked eyes, and compared with other warm colors, it can make the home environment more natural and real.

That's why we chose the 2850K as our Rated CCT.

To maximize the light quality, the light color of each of our lamps is very close to natural light. To this end, we used Duv as an important control point for the product.

What is Duv? First of all, we need to know why sometimes lamps with the same color temperature have completely inconsistent colors.

The color temperature on the left is 3265K, and the color temperature on the right is 3282K. They only differ by 17K.

Don't think it's our naked eye that can find the 17K difference.

We can understand from the figure that the points lying on the isotherm are all the same color temperature, but they are far apart, so the natural colors will not be consistent.

So we have managed the Duv value. If the Duv is closer to 0, it means that the light color is closer to natural light. Then you will naturally feel comfortable. The picture below is our test report, we can see that our Duv value has reached 0.0003

 

High light efficiency, high CRI, and no discoloration after a long time of use.

Frequent replacement of bulbs is a painful thing. Although LED light generally has a relatively long life, this life only means that the lamp is still glowing. However, for people who want to have better light color and quality, it is difficult for conventional bulbs to achieve the stability of light color after installation.

The light color of the LED Module bead is greatly affected by temperature, because the heat will change the physical properties of the material in the COB, resulting in a color shift. This is a process of change, and its rate is determined by the number of LED chips. Generally speaking, under the same power, the more LED chips, the less heat generated by a single LED, and the higher the stability.

The diameter of the light-emitting surface of TILLUME COB reaches 17mm, and the common 8W LED on the market is generally 7-11mm. At the same time, 3 times more LED chips can ensure that we have a long life and the light color does not shift. At the same time, the efficiency of CRI90+ reaching 95lm/w at the same time is also a rare high quality in the market.

Since the plastic reflector works in a long-term high-temperature environment, the electroplated reflective layer on the surface is prone to fall off and turn yellow, which has a great impact on the light color of the spotlight. In order to better maintain the light color, We use aluminum reflectors and glass dust covers to avoid this from happening. At the same time, the aluminum reflector also has a certain heat dissipation function, which allows our bulbs to have a longer life.

 

This 24V LED MR16 Module is our first program that is used in KNX and DALI Home Automatic Lighting Control System. And in the past 8 years, There have been nearly 30,000pcs per year LED spots sold on the Euro market.

Lucky, almost users will marvel at our 24V LED 2850K Spot. Whether its diming performance with DALI and KNX system or high lighting efficiency under CRI90 level.