Surface-mounted housings for TILLUME 24V LED spots

Surface-mounted housings when the ceiling should stay intact

Use surface-mounted housings when the ceiling should stay closed: concrete ceilings, renovation projects, shallow ceiling voids or rooms where the fitting remains visible.

Each housing holds a TILLUME 24V LED spot module. Choose the housing for the visible ceiling style and the module for light output, colour temperature, CRI and dimming.

Popular project situations

A surface-mounted housing is usually the right route when a recessed cut-out is not possible, or when the fitting should be visible on the ceiling.

Still comparing surface-mounted, recessed and pendant fittings? Start with the ceiling type, then choose the housing.

No cut-out

Visible ceiling installation

Useful when a ceiling cut-out is not possible or not desired, especially in renovation or concrete-ceiling projects.

Aim the light

Pivoted spot direction

Pivoted versions help direct the beam toward walls, furniture, corridors or selected accent areas.

Easier mounting

Separate cover design

The aluminium cover is fixed to the ceiling first. The visible housing is attached afterwards, so installation is easier.

Modular system

Housing + LED module

The surface-mounted housing holds the LED spot module; light quality and control are selected through the module and 24V system components.

View surface-mounted housings Choose LED spot modules View all ceiling fittings
Sorteer op:
IP44 Wasserdicht Vertieft Deckenleuchte Aufputzmontagerund Starr weiß

Witte anti-reflecterende plafondlamp voor in de badkamer | Opbouw, rond, stijf

€14,18 EUR
IP44 waterdicht, afmetingen: Ø93 mm x H 110 mm, met stevige modulebeugel, kleur: witte constructie. Waterdicht voor de badkamer. Gemaakt van robuust aluminium en gepoedercoat oppervlak. Anti-reflectie IP44 plafondlamp zonder...
Snelle kijk Voorafgaande bestelling
IP44_Wasserdicht_Vertieft_Deckenleuchte_Aufputzmontagerund_Starr_schwarz

Zwarte anti reflecterende plafondlamp voor de badkamer | Opbouw, rond, stijf

€14,18 EUR
IP44 waterdicht, afmetingen: Ø93 mm x H 110 mm, met stevige modulebeugel, kleur: zwarte constructie, niet draaibaar. Gemaakt van robuust aluminium en gepoedercoat oppervlak.  Anti-reflectie IP44 plafondlamp zonder LED-module Hoogtepunt:...
Snelle kijk Voeg toe aan winkelkar
Zwarte anti-reflectie plafondlamp | Opbouw, rond, draaibaar

Zwarte anti-reflectie plafondlamp | Opbouw, rond, draaibaar

€13,98 EUR
Afmetingen: Ø93 mm x H 110 mm, modulebeugel vlak, kleur: zwarte constructie, draaibaar. Gemaakt van robuust aluminium met gepoedercoat oppervlak. Geïntegreerd draaimechanisme voor gerichte verlichting van uw ruimtes. Anti-verblindingsplafondlamp zonder...
Snelle kijk Snelwinkel
IP44 Surface mounted square black ceiling housing with flush rigid module bracket - TILLUME

IP44 Opbouw vierkant zwart plafondbehuizing met verzonken, vaste modulebeugel

€15,19 EUR
IP44 Waterdichte plafondbehuizing, vierkant, zwart, met inbouwmodulehouder, stijf, zonder LED-module   Hoogtepunt: IP44 waterdichte opbouwarmaturen (plafond) worden beschermd door 2 lagen waterdichte rubberen rings en de voorkant is voorzien van...
Snelle kijk Voeg toe aan winkelkar
IP44_Wasserdicht_Vertieft_Deckenleuchte_Aufputzmontagerund_Starr_Aussen_weiss_innen_schwarz

Anti-reflectie plafondlamp | Opbouw, rond, draaibaar

€14,18 EUR
Afmetingen: Ø93 mm x H 110 mm, met stevige modulebeugel, kleur: buitenkant wit, binnenkant zwart, draaibaar. Gemaakt van robuust aluminium met gepoedercoat oppervlak.  Anti-verblindingsplafondlamp zonder LED-module Hoogtepunt: Materiaal aluminium, veilig...
Snelle kijk Voorafgaande bestelling
Anti-reflectie plafondlamp | Opbouw, rond, draaibaar

Anti-reflectie plafondlamp | Opbouw, rond, draaibaar

€13,98 EUR
Afmetingen: Ø93 mm x H 110 mm, met stevige modulebeugel, kleur: buitenkant wit, binnenkant zwart. Gemaakt van robuust aluminium met gepoedercoat oppervlak.  Anti-verblindingsplafondlamp zonder LED-module Hoogtepunt: Materiaal aluminium, veilig en...
Snelle kijk Snelwinkel

Surface-mounted fitting guide

Surface-mounted housings for 24V LED spot modules

A surface-mounted housing is the visible ceiling fitting that holds a TILLUME 24V LED spot module when a recessed ceiling cut-out is not possible or not preferred. It is also called a surface-mounted ceiling fitting, surface-mounted spot housing or surface-mounted spotlight housing.

Choose the housing for the visible ceiling form, fixing method, holder type, light direction and, on selected models, IP44 splash protection. Choose the 24V LED spot module for light output, colour temperature, CRI and dimming function. This is practical for renovations, concrete ceilings, shallow ceiling voids, bathrooms with suitable IP44 fittings and 24V LED spot systems controlled by DALI, KNX, Loxone or PWM.

Installation structure

Separate aluminium cover for easier surface mounting

TILLUME surface-mounted housings separate the aluminium cover from the visible aluminium housing. The cover is fixed to the ceiling first; the visible housing is attached afterwards. This makes alignment and fastening easier, especially when working overhead.

  • Fix the aluminium cover to the ceiling first.
  • Attach the visible aluminium housing afterwards.
  • The spot holder carries the LED spot module and can be adjustable or fixed, depending on the product type.
  • This cover-and-housing structure is used across TILLUME surface-mounted fittings.
Exploded view of a white surface-mounted round pivoted housing with aluminium cover, aluminium housing and swiveling spot holder
Why this helps: the aluminium cover can be fixed first. The visible housing is attached afterwards, so the installer does not need to hold the deeper lamp body in place while aligning the screw holes.

Product type guide

Three surface-mounted housing types for different lighting needs

Start with the lighting result you need: adjustable direction, fixed downlight-style mounting with IP44 options, or anti-glare comfort. Then choose the housing type that fits that result.

1. Adjustable direction

For a visible ceiling light where the beam should be aimed at a wall, corridor, furniture surface or accent area. Round and square designs are available.

2. Fixed downlight style with IP44 option

For a cleaner ceiling look when the light direction is already planned. TILLUME fixed surface-mounted fittings are available as IP44 solutions for bathrooms or indoor spaces where splash protection is required.

3. Anti-glare comfort

For lower visual glare and a calmer ceiling light, with white or black fittings, a 20° shielding angle and a 20mm recessed light source position.

Adjustable spot holder

Pivoted round and square housings in white or black for adjustable light direction

Use a pivoted surface-mounted fitting when the beam needs to point toward a wall, corridor, worktop, artwork or seating area. The swiveling spot holder carries the LED spot module and lets you adjust the beam direction after installation.

  • Round and square designs are available.
  • White and black finishes can blend into the ceiling or create a stronger contrast.
  • The pivoted holder adjusts up to 20°.
  • The visible housing height is 90mm.
  • Useful when the ceiling should stay closed, for example in renovation projects or concrete ceilings.
  • Good when the light point is fixed but the beam still needs to aim toward a wall, furniture surface, corridor or accent area.
  • Check room height, spot position, beam angle and dimming level before choosing the final layout.
White surface-mounted round pivoted housing for TILLUME 24V LED spot modulesWhite square surface-mounted pivoted fitting for TILLUME 24V LED spot modules
Round and square pivoted surface-mounted fittings

For adjustable visible ceiling installation with white or black housings, up to 20° tilt and a 90mm housing height.

Fixed spot holder

Fixed IP44 surface-mounted fittings for bathrooms and splash-prone indoor spaces

Choose a fixed spot holder when the beam direction is already planned and you want a clean downlight-style result. This type is available as IP44 for bathrooms, washrooms and similar indoor areas.

  • IP44 protection for bathrooms, washrooms and similar indoor areas.
  • Available as black square and white round fittings.
  • Best when the light direction and ceiling position are already planned.
  • Check local bathroom zones and installation rules before using any fitting in wet areas.
  • IP rating belongs to the housing; KNX, DALI or Loxone compatibility comes from the LED module, 24V controller and system design.
Black square IP44 surface-mounted ceiling fitting for bathroomsWhite round IP44 surface-mounted ceiling fitting for bathrooms
IP44 fixed surface-mounted fittings

For bathroom and splash-prone indoor ceiling lighting where a fixed downlight-style beam is preferred.

Anti-glare housing

Anti-glare surface-mounted housings in black or white with IP44 options

Choose an anti-glare housing when the spot should look calmer from normal viewing angles. The LED spot module sits deeper inside the housing, so direct brightness from the ceiling is reduced. IP44 versions are available for bathrooms and splash-prone indoor areas.

  • White and black round fittings are available.
  • Choose an IP44 anti-glare option for bathrooms and splash-prone indoor spaces.
  • The 20° shielding angle helps reduce direct glare from normal viewing angles.
  • The light source sits 20mm deeper inside the housing.
  • White versions blend into light ceilings; black versions create stronger contrast and can reduce perceived glare.
  • Check LED module output, beam angle, dimming level, room height and local bathroom zone rules before ordering.
White round anti-glare surface-mounted housing with recessed light sourceBlack round anti-glare surface-mounted housing with recessed light source
White and black anti-glare fittings with IP44 options

For calmer ceiling light with IP44 options, a 20° shielding angle and 20mm recessed light source depth.

Match the surface-mounted housing with a 24V LED spot module

The surface-mounted housing is not the light source. It holds the 24V LED spot module and defines the visible ceiling form. The LED module defines light output, colour temperature, CRI and dimming.

This lets you choose the visible housing for the room first, then select the LED module for wattage, colour temperature, CRI, dimming type or Tunable White / RGBW function.

Smart-home note: KNX, DALI and Loxone belong to the control layer. The surface-mounted housing holds the LED spot module; dimming and colour control come from the matching 24V PWM controller or actuator.
For a deeper explanation of TILLUME's modular 24V LED spot system, fixture selection and later module replacement, read the modular system guide. Read the modular system guide
TILLUME 24V LED spot module combined with a surface-mounted housing
Example: LED spot module combined with a matching surface-mounted housing.

Looking at other ceiling mounting styles?

If you are still comparing installation styles, check recessed ceiling luminaires and other ceiling fittings before choosing the housing.

Complete the 24V LED spot system

For surface-mounted 24V lighting, plan the housing, LED spot module, controller and power supply together. This matters most for dimming, Tunable White, RGBW/RGBWW and wired smart-home systems.

Practical questions before choosing surface-mounted housings

  1. 1
    Is a surface-mounted housing a complete LED spotlight?

    No. The surface-mounted housing is the mechanical part. It becomes a complete surface-mounted LED spotlight only when paired with a compatible TILLUME 24V LED spot module.

  2. 2
    Which surface-mounted housing type should I choose?

    Choose an adjustable spot holder if you need beam direction control, a fixed spot holder if the light direction is already planned, or an anti-glare housing if visual comfort is the priority.

  3. 3
    When is a surface-mounted housing better than a recessed frame?

    It is often better when the ceiling cannot be cut, the ceiling void is too shallow, the project is a renovation, or the visible housing should become part of the room design.

  4. 4
    What should be checked before ordering?

    Check ceiling material, fixing method, cable entry, housing size, visible height, spot holder type, IP rating, glare requirement and whether the selected LED module fits the housing. If the fitting is used in a bathroom or splash-prone indoor area, choose a suitable IP44 surface-mounted option and check the local installation zone rules.

  5. 5
    Does the housing make the light KNX, DALI or Loxone compatible?

    No. The housing only holds the LED spot module. KNX, DALI and Loxone compatibility depends on the LED module, 24V PWM controller or actuator, power supply and system configuration.

  6. 6
    Can the LED module be replaced later?

    Yes. In the TILLUME modular setup, the LED spot module is separate from the housing. Suitable fittings allow front-side access for later replacement or upgrades.

Need help matching surface-mounted housings, modules and controllers?

For KNX, DALI, Loxone or larger 24V LED spot projects, it is worth checking the housing, LED spot module, PWM controller, power supply, cable length and voltage drop together before ordering.

View 24V LED spot system guide