DALI-Bus-Netzteil (DIN-Schiene)

DIN Rail DALI Bus Power Supply | Output 16V 2.4A

Item Code: DLP-04 / Series: DLP

€23,59 EUR €18,99 EUR SAVE 19%

Tax included, Free Shipping (8-15days)

Features:
-Compact size with 2SU(35mm)width
-Univeral AC input/Full range
-Withstand 300VAC Surge input for 5 seconds
-Isolation class II
-Maximum supply current allowed on a DALI line in total: 250mA;
Application:
-DALI BUS
-DALI BUS Powered UnitsDALI BUS

Tips:

Description

 DIN Rail DALI Bus Power Supply | Output 16V 2.4A for DALI Control Gear vs DALI Device in Smart Lighting

Description

TILLUME DALI BUS power supply DLP-04 is a power supply with high efficiency and a small size, supplying 240mA for DALI control gears and DALI device which without power supply circuits. The -20℃~+60℃ wide temperature operating range can meet all kinds of application.

It is perfectly suitable for power up any products labeled with the DALI trademark. Also it meets Class 2 power supply standard and SELV low voltage safety standard.

Features:

  • Compact size with 2SU(35mm)width
  • Univeral AC input/Full range
  • Withstand 300VAC Surge input for 5 seconds
  • Isolation class II
  • Maximum supply current allowed on a DALI line in total: 250mA 

Application:

  • DALI BUS
  • DALI BUS Powered Units

Electrical Specifications

Output: DA+,DA-

Output Type: DALI Supply
Marking Output Terminals: DA+, DA
Onput Voltage range: 15.3~18.7V
Rated Current: 240mA
Rated Wattage: 3.84W
Ripple and Noise: 50mVp-p
Setup and Rise Time: 250ms, 50ms/115vac,230VAC
Hold Up Time(typ.): 70ms/230VAC

Input: L,N

Input Type: Main Power Supply
Marking Input Terminals: L, N
Input Voltage Range: 90-264VAC
Frequency: 47-63Hz
Leakage Current: <0.25mA / 240VAC
No load power consumption: <0.5W

Protection:

Short Circuit: Hiccup mode, recovers automatically after the fault condition is removed
Over Voltage: 23.6 ~ 27V Shut down and latch off o/p voltage, re-power on to recover

Environment:

Working Temp.: Tcase=-20 ~ +60℃
Max. Case Temp.: Tcase=+85℃
Working Humidity: 20 ~ 90% RH non-condensing
Storage Temp., Humidity: -40 ~ +85℃, 10 ~ 95% RH

Safety & EMC:

Safety Standards: EN61347-1, BS EN/EN61347-2-11
Dali Standard: Compliance to IEC62386-101 (DALI-2), IEC 62386-102(DALI-2), IEC 62386-207(DALI-2), IEC 62386-209(DALI-2)
Withstand Voltage: I/P-O/P:3KVAC
Isolation Resistance: I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC Immunity: Compliance to BS EN/EN55015, BS EN/EN61547, BS EN/EN61000-3-2,-3, EAC TP TC 020

Others:

Dimension: 35*90*54.5mm (L*W*H)
Packing: 0.087Kg