Tunable White LED Spot | 60° Ra90 2200-6500K 24V 4W+4W
Item Code: 81061M04 / Series: Expert
Tax included, Free Shipping (8-15days)
Tips:
Deep Tunable White MR16 Style LED Spots Module | 4W+4W
Feature
TILLUME Deep Tunable White LED Spot enables a previously unprecedented color temperature range from 2200 K to 6500 K and thus ensures the optimum light color in every application.
1. Classic "tunable white" (the separate adjustment of the brightness and the color temperature)
2. Circadian color gradient throughout the day, the healthy one, the biorhythm adapted light colors
3. Bright daylight during the day and a cozy warm color temperature in the evening
All of these functions can be optimally implemented with a suitable KNX or DALI dimmer. In addition, the spots are also suitable for PWM dimmers.
Another advantage is the compact design of the spot, because it can be easily into a conventional recessed spotlight/mounting ring for use MR16 bulbs. Due to the incomparably compact Aluminum housing, which also serves as a heat sink, is suitable spot module perfect for use as a retrofit solution.
Technical Data
Operating voltage: 24V DC
Max. current consumption: 0.33 A
Max. power consumption: 8 W
Luminous flux: approx. 710 lm (combined)
Color temperature: 2200K - 6500K
Color rendering index CRI @2200K/6500K: >90 Ra
Color rendering index CRI @4000K: >95 Ra
Beam angle: 60 degrees
Dimmable: Yes, up to 1% with the appropriate PWM dimmers
Chip type: COB
lifetime: >50,000 hours
Operating temperature: -25 degrees Celsius to +60 degrees Celsius
Storage temperature: -40 degrees Celsius to +80 degrees Celsius
Dimensions: 50 mm with a diameter of 49 mm
Connecting cable: 3 wires and 150 mm length
Operated With KNX System
Controller by MDT TECHNOLOGIES
Available for the item as below
AKD-0424R.02
AKD-0424R2.02
AKD-0424V.02
AKD-0324V.02
AKD-0224V.02
Warm Tips: Reach Max Power 8W needs the actuator support max brightness output function. Please check the software in advance. The spot work with actuater, which only wattage balance fuction(some brand call it constant brightness fuction) can’t reach 8W max power. As we know MDT AKD-0424R.02. actuator support max brightness output.
Operated With DALI System
Controller by LUNATONE
Avaliable for the item as below
DALI LED Power Supply(DT8):
89453849-CWW-24V
DALI LED Dimmer (CV, DT8):
89453836(4A)
86458673(8A)
89453838(10A)
89453841(16A)
89453841-HS(16A DIN Rail)
DALI 2Ch LED Dimmer (CV, DT6):
89453827
89453833
86459561
89453830
8945380-HS
Warm tips: If you use DALI DT8 actuater, the max power is 4W, can’t reach 8W max power. Please note it.
Related Products
- MR16, GU10 LED Holder
- Connector
- 5050 SMD LED Stripe 24V Tunable white
Since 2015
DTW development
Built around real KNX and DALI controller requirements.
Custom COB
Not off-the-shelf
Chip selection, phosphor and binning are specified for stable light quality.
Reflector optics
Cleaner mixed beam
Designed to reduce visible CCT separation in DTW applications.
System reliability
Driver + heat path
Electrical and thermal margins matter more than headline lifetime claims.
01 / Development
Development of Tunable White 24V LED Spots
TILLUME has been developing dim-to-warm LED lighting products since 2015. At that time, KNX and DALI tunable white controllers were still limited, and many controller platforms were originally built around single-CCT or DT6-style applications. Our early product development therefore focused on compatibility with the most common control methods available in real projects.
The challenge
Available dual-CCT COB options were limited. Some early market solutions offered only CRI 80, restricted customization and insufficient brightness for our target applications.
Our solution
We worked with partners to develop a two-CCT COB and designed a dedicated circuit for constant-voltage PWM signal input with a 3-wire connection.
Optical requirement
Because the light-emitting position changes during CCT adjustment, the optical system must mix light carefully to avoid visible colour separation.
02 / Construction
Key Components in a 24V LED Spot Module
A high-quality LED module is not the result of one single component. It depends on chip selection, COB packaging, driver design, optical design and heat dissipation working together as a system.
LED chips
The LED chip is the core of the COB. Chip quality affects brightness, colour accuracy, heat generation and service life. TILLUME places enough large-size chips within the limited COB area so each chip has more operating margin at the required current.
Larger chips can improve light efficiency and reduce heat stress, helping to limit colour shift and improve long-term stability.
COB packaging process
Instead of simply purchasing a common COB from the market, TILLUME cooperates directly with LED chip and LED packaging partners. The LED chips are fixed on a high-reflectivity aluminium substrate, connected with gold wire and covered with phosphor.
Every COB is tested for photoelectric performance to improve consistency in light colour and electrical behaviour. For higher reflective efficiency, we use high-reflectivity material from German manufacturer Alanod as part of the COB substrate solution.
High colour rendering is not only about a CRI number. We also care about the relationship to the Planckian locus and colour-quality behaviour that users can actually see in warm residential lighting.
03 / Electronics
Specialized Circuit Driver for 24V PWM Systems
Low-voltage installations may experience voltage drop along the cable. In simple LED products, changes in input voltage can cause changes in LED current, which may create visible brightness differences between modules installed at different distances.
TILLUME uses a dedicated constant-current optimized circuit inside the spot module. Within the intended voltage range and system conditions, this helps the module keep a more stable drive current and reduces visible brightness inconsistency.
04 / Thermal Design
Heat Dissipation: Why Real Lifetime Depends on Temperature
LED lifetime claims are often based on idealized test conditions. In real luminaires, the COB, bonding materials and internal driver circuit all operate at elevated temperatures. Better thermal design is therefore one of the most important factors for long-term reliability.
6063 aluminium
Selected for better thermal conductivity compared with lower-cost aluminium options often used in LED housings.
Larger heat path
The module body and fin structure are designed to increase contact area with surrounding air.
Driver heat transfer
Internal PCB and mechanical design help conduct heat away from electronic components.
Test condition shown above: 24V input, both channels at maximum power, operated until the temperature stabilized after approximately 20 minutes.
05 / Optical System
Lens or Reflector?
For dual-CCT COBs, a lens can easily amplify colour separation because the emitting position changes during CCT adjustment. A reflector-based system gives us more control over light mixing before the beam leaves the module.
Common lens risk
The centre and edge of the beam may show different colour temperatures, especially during dim-to-warm transitions.
TILLUME reflector approach
A mixing part and reflector system help blend different CCT directions before forming the final beam.
The metal reflector also avoids the yellowing risk associated with some plastic optical parts after long-term operation.
06 / Quality Control
Strict Quality Control Process
Incoming material control
Important materials are inspected with higher attention before entering production.
Colour consistency
COB and chip sorting are used to improve consistency between modules and batches.
Appearance standard
Mechanical details and surface finish are controlled to match the product positioning.
Aging test
Each lamp goes through an aging process to reduce the risk of early failure after shipment.
Built for serious 24V smart lighting projects
TILLUME DTW spots combine custom COB development, PWM-compatible electronics, reflector optics and thermal engineering for professional KNX, DALI and low-voltage lighting systems.
Explore TILLUME DTW Spots